| Gallery, Projects and General > How do I?? |
| Sucking disc solenoid? |
| << < (4/4) |
| Deko:
Hi Martin Have a look at Arc Euro's site, i think they have just started selling magnetic swarf picker-uperer's for want of a better name Cheers Derek. |
| Arnak:
Hi Derek, Thanks for the tip, I'll pop over and have a look. Martin |
| hopefuldave:
--- Quote from: Weston Bye I've seen the pulling force as well as the stroke distance of the solenoid referred to as suckage. [/quote --- Ah, I remember that, is it the S.I. or ANSI system that has the Lovelace as the derived unit of suckage? Dave H. (The other one) --- End quote --- |
| Arnak:
Hi Andyf, Thanks to your advice I made a great pickup tool as per that url you supplied. I brought 10 magnets for about £6 from Ebay, some for other projects. ::) Having checked out the one from Arc at about £17, a bit too expensive that, I made one in a very short time and can highly recommend that method. The plastic pipe was a cistern overflow tube, just the right inside diameter for the magnet plus a bit of gaffer tape to close off the end. Works a treat so I'll probably make another one for the mill and have one for the lathe and mill. :headbang: Martin |
| Navigation |
| Message Index |
| Previous page |