Gallery, Projects and General > Project Logs

Potty Popcorn Engine

<< < (15/42) > >>

saw:
Very nice build  :nrocks: :nrocks: :nrocks:

sbwhart:
Cheers Saw

Chris

Its just a nut and bolt but with round head the size you want to file the radius, you make the bolt a close fit in the hole, you just use it to guide where to machine/file too.

You can see it her with the screwdriver slot across it.



Stew

doubleboost:
Hi
Stew
You are making this look to easy :bow: :bow: :bow:
It is nice to see files being used as they were intended :thumbup: :thumbup: :thumbup:
When you get this finished a triple expansion engine should slow you down a bit  :bugeye: :bugeye: :bugeye:
John

sbwhart:

Thanks John,


--- Quote ---It is nice to see files being used as they were intended
--- End quote ---


I think files tend to get overlooked, you can do a lot with them, the first job we had as an apprentice was to file  a block of steel square and flat then drill a hole in it and file this so a square block fitted in it, after four week I hated the site of that bloody block.  :D


--- Quote ---When you get this finished a triple expansion engine should slow you down a bit
--- End quote ---

Something like this



 :)
Stew

doubleboost:
Stew
Been there done the same thing :doh: :doh: :doh:
Did us no harm though
I got a clip round the ear for taking the thick off on a grinder :dremel: :dremel: :dremel:
Happy days
John

Navigation

[0] Message Index

[#] Next page

[*] Previous page