| Gallery, Projects and General > Project Logs |
| Potty Popcorn Engine |
| << < (15/42) > >> |
| saw:
Very nice build :nrocks: :nrocks: :nrocks: |
| sbwhart:
Cheers Saw Chris Its just a nut and bolt but with round head the size you want to file the radius, you make the bolt a close fit in the hole, you just use it to guide where to machine/file too. You can see it her with the screwdriver slot across it. Stew |
| doubleboost:
Hi Stew You are making this look to easy :bow: :bow: :bow: It is nice to see files being used as they were intended :thumbup: :thumbup: :thumbup: When you get this finished a triple expansion engine should slow you down a bit :bugeye: :bugeye: :bugeye: John |
| sbwhart:
Thanks John, --- Quote ---It is nice to see files being used as they were intended --- End quote --- I think files tend to get overlooked, you can do a lot with them, the first job we had as an apprentice was to file a block of steel square and flat then drill a hole in it and file this so a square block fitted in it, after four week I hated the site of that bloody block. :D --- Quote ---When you get this finished a triple expansion engine should slow you down a bit --- End quote --- Something like this :) Stew |
| doubleboost:
Stew Been there done the same thing :doh: :doh: :doh: Did us no harm though I got a clip round the ear for taking the thick off on a grinder :dremel: :dremel: :dremel: Happy days John |
| Navigation |
| Message Index |
| Next page |
| Previous page |