| Gallery, Projects and General > Project Logs |
| Potty Popcorn Engine |
| << < (21/42) > >> |
| doubleboost:
You made that look easy :bugeye: :bugeye: :bugeye: Cracking build log Thanks :clap: :clap: John |
| sbwhart:
Thanks Guys, Andy I got an headace counting your mates fingers, took me a while spotting what was odd it didn't look like but I was damed if I could spot what. An extra diget would come in darn handy you could have one finger for scratching your arse and one for picking your nose :lol: Its bin awfull getting on the site over the last couple of days, I was begining to fret about it, like losing an arm. Moving on completed the base. Measured the centre height to the crank shaft and the piston rods take one from the other and thats what the base needs to be made with mine it came spot on 14mm. Fly cut a chunk of ally square and to size. Then marked out uts centre and mark a square to match the base of the cylinder. Drilled the clamping holes Then with a 10mm dia ball nosed cutter and the mill head slewed over 20 deg, mill a nice flared foot, working to the lines marked. This is what it looks like. Stew |
| sbwhart:
Another bit done the slide valve coupling. Not many more to do now. Stew |
| saw:
:bow: :bow: :bow: I have no words.. |
| Rob.Wilson:
Looking lovely Stew ,,,,,,,,,,, sculpture in metal :med: :clap: :clap: :clap: Rob |
| Navigation |
| Message Index |
| Next page |
| Previous page |