Gallery, Projects and General > The Design Shop
D1-4 Adapter
Davo J:
As Dave H said follow my link above for the picture.
Grizzly have the nose cam locks for around $5 in their lathe spare parts, it's in one of the cheaper lathe parts manuals.
I would buy them from their, but they have a $200 minimum for us over here. :doh:
Dave
DeereGuy:
--- Quote from: Swarfing on August 22, 2011, 05:49:11 PM ---Guys i just PM'd Bob to see if he can help with the details, in the mean time does anybody have a pic of the locking bolts in the nose itself? i see they themselves have a locking screw that comes in from the side. Just trying to get a mental picture now. What i shall do is build two one out of bright steel bar that have already that i can use later on a rotary table then build another out of harder stuff. Just ordered some pins for starters and see where we go from there if Bob comes back to me.
Thanks
Paul
--- End quote ---
Hi Paul,
Sorry I am very busy with work, family and other interests and probably won't be back into my shop untill the snow and cold hit us. I can send you the plans that I am giving out to everyone that does not take the standard OEM camlock pin. If this will help you out then let me know. I do NOT recommend using this for any high speed use.
DeereGuy:
--- Quote from: Davo J on August 22, 2011, 09:26:32 PM ---As Dave H said follow my link above for the picture.
Grizzly have the nose cam locks for around $5 in their lathe spare parts, it's in one of the cheaper lathe parts manuals.
I would buy them from their, but they have a $200 minimum for us over here. :doh:
Dave
--- End quote ---
Dave,
Are you saying that Grizzly has the cam lock pins for the spindle for $5.00? I know the pins for the chuck plates could be had cheap but have never seen that price for the camlock pins that go in the spindle....the last price I seen at Grizzly for these were near $30.00 each.
DaveH:
Bob,
Nice to see you are still around. :)
:beer:
DaveH
75Plus:
Here is Grizzly's Parts list. The items in question are numbers 175 thru 178. Current pricing would be $12.25 for all four parts times the number of assemblies needed.
http://www.grizzly.com/products/G4002/parts/6
Joe
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version