| The Shop > Metal Stuff |
| A Bit Over Engineered |
| (1/3) > >> |
| doubleboost:
Hi A friend of mine asked me if i could build him a spike harrow to tow behind a quad His wife has a horse she rides on a arena made from what looks like bark chippings It has become compacted and needs braking up This is what i came up with !0 metres of 40 mill heavy wall box section and a bit of welding John |
| DaveH:
Hi John, Looks great nicely made, looks strong. I use to work on a farm many years ago. There was a special hitch that would disengage if the plough or whatever decided to dig in. Otherwise the tractor would tip up and throw you off the back right under the plough. Just thought I would mention it. :beer: DaveH |
| sbwhart:
Nice bit of fabricating and welding John, a strong looking Jobby. :thumbup: Stew |
| John Hill:
--- Quote from: DaveH on August 21, 2011, 03:03:26 PM ---Hi John, Looks great nicely made, looks strong. I use to work on a farm many years ago. There was a special hitch that would disengage if the plough or whatever decided to dig in. Otherwise the tractor would tip up and throw you off the back right under the plough. Just thought I would mention it. :beer: DaveH --- End quote --- ...or just make sure the hitch point is below the level of the rear axle. :beer: |
| Stilldrillin:
A nice bit of fabbing there John! :clap: :clap: Hope it works as good as it looks..... :thumbup: David D |
| Navigation |
| Message Index |
| Next page |