Gallery, Projects and General > Project Logs

Rotary (4th) axis for my cnc mill

<< < (5/5)

stefang:
Done!

Machined the casting for the spindle clamp, first on the shaper:


Then over to the mill, boring the hole:


Pretty close, there is only about 0,5mm between the spindle head of the mill and the part left:


Then I made a mounting plate...


..and screwed everything together:


Pretty happy how it came out, runs smooth and without backlash :)

I got also a short video:


Dull endmill, to low feed and acetal, so I get a lot of burr...but you get the idea :D

Time to go to bed...
Stefan

doubleboost:
Nice
Castings came out fine
 :thumbup: :thumbup: :thumbup:
Spindle is a piece of art
John

madjackghengis:
That is some mighty fine work there, Stefan, I had a bunch of questions, but they all got asked before I got to the end.  I was also going to comment on the very fine carriage stop, and the fine tool post, then noticed everything you show in your shop is a fine piece of equipment, and am left with "very nice indeed".  That tail stock casting came out a beauty as well, and the other casting ought to be fine when it's cleaned up, all in all very impressive looking, and fine finishes. :nrocks: :headbang: :beer:  cheers, mad jack

Rob.Wilson:
 :bow: :bow: :bow: :bow: :bow: :bow: Excellent  job Stefang   :thumbup:

Rob

Navigation

[0] Message Index

[*] Previous page