| Gallery, Projects and General > Project Logs |
| Rotary (4th) axis for my cnc mill |
| << < (5/5) |
| stefang:
Done! Machined the casting for the spindle clamp, first on the shaper: Then over to the mill, boring the hole: Pretty close, there is only about 0,5mm between the spindle head of the mill and the part left: Then I made a mounting plate... ..and screwed everything together: Pretty happy how it came out, runs smooth and without backlash :) I got also a short video: Dull endmill, to low feed and acetal, so I get a lot of burr...but you get the idea :D Time to go to bed... Stefan |
| doubleboost:
Nice Castings came out fine :thumbup: :thumbup: :thumbup: Spindle is a piece of art John |
| madjackghengis:
That is some mighty fine work there, Stefan, I had a bunch of questions, but they all got asked before I got to the end. I was also going to comment on the very fine carriage stop, and the fine tool post, then noticed everything you show in your shop is a fine piece of equipment, and am left with "very nice indeed". That tail stock casting came out a beauty as well, and the other casting ought to be fine when it's cleaned up, all in all very impressive looking, and fine finishes. :nrocks: :headbang: :beer: cheers, mad jack |
| Rob.Wilson:
:bow: :bow: :bow: :bow: :bow: :bow: Excellent job Stefang :thumbup: Rob |
| Navigation |
| Message Index |
| Previous page |