| The Breakroom > The Water Cooler |
| Flywheels.......... |
| (1/1) |
| Rick O Shea:
Hi Chaps and chapesses. Mainly for UK readers. Happened to be in Tesco (other supermarkes are avalaible) when I noticed that they were selling cast iron weight lifting weights seperately, at a very very reasonable sum. I bought a few for the potential use as flywheels. I have no idea what the quality of the cast iron might be.................. but judging at the price they are possibly from China and might not be that wonderful, but I have not machined one yet so am only speculating. In the USA I undersand that woolmart (asda in the UK) sell a weight lifting weights and our cousins across the pond have used them with some success, as flywheels for model and small engines. Might be of some interest to fellow metal stranglers over here. best wishes |
| bry1975:
Have you weighed the weights that will give you an idea of the quality? Bry |
| John Hill:
I have used a few of these. They are not too bad but the hole in the middle is probably bigger than you might be wanting. One of the things I found it that it is much, much less stressful to use a cold chisel and take all the raised lettering off before putting it in the lathe. |
| Navigation |
| Message Index |