| Gallery, Projects and General > Gallery |
| More stuff |
| (1/2) > >> |
| mechman48:
:wave: Some more pics. I have dug out the trial version of my taper turning attachment, this needs a couple more mods to it to finish it off, i.e. marking fiducal lines to define the taper being cut, a more positive return screw action 'n stuff like that. As always I have used old drill MT's where possible & being commercially produced are as accurate as can be.The ball nose (from old ball bearing) was silver soldered on to provide some lateral movement in non protected centers (methoughts :scratch:) still have yet to prove it's practicality in tests :dremel:. Clamp type knurling tool, all the knurls in my pics were created using this Will post some more later (hope some of you are not getting too bored) :coffee: bfn |
| andyf:
--- Quote from: mechman48 on July 25, 2011, 03:44:47 PM ---..... Will post some more later (hope some of you are not getting too bored) :coffee: bfn --- End quote --- Bored? No way. WE LOVE PICS :D |
| doubleboost:
Thanks for posting The taper turning centre looks to be a handy bit of kit John |
| saw:
Nice work :thumbup: |
| Topos:
Gratitude for clever device is never boring! Thanks. :beer: |
| Navigation |
| Message Index |
| Next page |