Gallery, Projects and General > Gallery

sub table for holding small parts in a bandsaw. appears in M.E.W 179

(1/2) > >>

wheeltapper:
Hi
I saw this in the latest issue of MEW and thought " what a good idea "
so here's my attempt at it.
heres the base with some clamps. the fence comes off for wider parts.


heres a small item clamped up.

and now the base is held in the saw vice.


the base will go to within 1/2 a mil of the blade.

Roy

Brass_Machine:
Roy...

I bet that is a handy tool to have. I have thought about doing one myself. I cut a lot of stock on my bandsaw and some of it is small. I made a couple of adapter type things to accomplish what I want... but those are for specific things. This looks a lot more useful.

Eric

DaveH:
Roy,

Thats a good mod, looks very versatile. :)

Always tricky cutting small parts, this looks to help alot :thumbup:

 :beer:
DaveH

jim:
easy to make and great, i'm going to knock one of these up (would have been useful yesterday :lol:) i'll be adding a "v" slot to hold round stuff

Mike Cole:
I have been waiting for a good short piece vice for the bandsaw for a while. This is one I will be making very soon. :) :)

Mike

Navigation

[0] Message Index

[#] Next page