The Shop > Metal Stuff

Good source for brass or ally disks 5 pieces of 40mm diameter x 12mm?

(1/3) > >>

bry1975:
 :D

Afternoon chaps,

Can anyone recommend a good source for some decent brass or ally 5 pieces of 40mm diameter x 12mm thick?

I can refinish the blanks here but can't cut them down or part them off as only have a wood lathe with metal chuck and faceplates and YES I need a proper lathe.  :(


TIA

Bry

Bluechip:
You can download this catalog (ue ). I know they do blanks.

http://www.m-machine-metals.co.uk/

Although blanks are usually 1" / 25 mm.

It would help if you gave some indication of you location, there may be someone who uses a supplier local to you who is willing to slice off to your dimensions .. :thumbup:

BC

Jasonb:
Whats wrong with a hacksaw, wont take long in brass with a sharp new blade.

College engineering sill saw balanks of a bar but there is likely to be a charge.

http://www.collegeengineering.co.uk/

bry1975:
Thanks chaps,

I've emailed the two links mentioned and will wait and see.

HS93:
I use

http://www.ringwoodprecision.com/

http://cgi.ebay.co.uk/160477659264?ru=http%3A%2F%2Fshop.ebay.co.uk%3A80%2Fi.html%3F_from%3DR40%26_npmv%3D3%26_trksid%3Dm570.l2736%26_nkw%3D160477659264%26_fvi%3D1&_rdc=1

http://stores.ebay.co.uk/Ringwood-Precision-Engineering/Aluminium-Round-Bar-/_i.html?_fsub=681408012&_sid=32977372&_trksid=p4634.c0.m322

they are very good speedy and will cut to lenth they also do via ebay but I find it better to ring, he is a nice bloke to deal with never had a problem with them

                                                            :nrocks::ddb:  :ddb: Peter :ddb: :ddb: :nrocks:

Navigation

[0] Message Index

[#] Next page