| The Shop > Tools |
| A Tangential Toolholder for the Sherline |
| << < (2/6) > >> |
| cedge:
Bernd As long as he's specified the compounded angle the tool will work fine. 12°, 12° and a 30° tool rake is what seems the be the common consensus. You'll be pleasantly surprised the first time you cut with it. Steve |
| Bernd:
Steve, That's what I've read about it also. Rudy Kouhoupt was a great fan of that tool form. He liked it very much. Once these holidays are out of the way and wife goes back to work I can get some shop time in and start working on my tangential toolholder. :) Bernd |
| Bernd:
Well I made a prototype today. Looks like it might work. Need to finish it first before I build the next and record for a build thread. Want to make sure it works before I do that. Ya I know :worthless:, but hang in there, it's coming soon to a PC near you. :D Bernd |
| kellswaterri:
Hi all...spotted this on another site...might be useful... http://www.gadgetbuilder.com/ToolHolders.html#Tangent All the best for now, John. |
| Darren:
Another one here http://home.hetnet.nl/~w_ermers/planned.html |
| Navigation |
| Message Index |
| Next page |
| Previous page |