Just unloaded one I got at a garage sale today. Came with the manual sheet, Indexing pulley, sanding disc plate and sanding table that mounts to the ways, both the 4" and longer tool rest, 8 delta and 1 Greenlee turning chisels, two face plates a face plate for grinding stone. original wrenches for banjo and chuck face plates. a live center, a spur drive, screw to tighten drill chuck, a Jacobs chuck, two antique dividers and calipers and 3 modern types, 3/4 hp reversing motor, bunch of old grinding wheels, And a pile of double end End mils in assorted sizes. Along with some misc. stuff and what I think is a plane blade sharpening holder by General.
Runs good on the speed it is set on, haven't changed the belt. It is set up to change from the from the front.
I have seen this lathe in the front of the the junkside of his garage for a couple of years when the door was open, going or coming from my parents house. He had it out about a year ago during a garage sale but no takers. He said that he was the second owner and he bought it from the original guys family. He used it once during the 8 years he has owned it. And he was hoping to move it out.
Anybody have one of these models and have any tips on it.






