Gallery, Projects and General > Project Logs
Four Truck Shay
<< < (6/7) > >>
Bernd:
Thanks Dave.

If you would have seen how out of shape it looked after I bent the bar you would have thought those holes will never line up. ::) But a little bit of twisting and coaxing and all was well.

Bernd
Bernd:
A bit of an  :update:. I've got all 4 archbar's bent. I did a little tweaking to get them to come out fairly well. The bent joints still need to be filled in with some weld. That's next. The jig was a big help in bending these, but the next four for the engine I'm going to try something alse. I've got some ideas floating around.

Here's what four archbar's look like.  ::)



Next will be some milling of the cast iron parts. So it's time to clean up the mill and have at it.

Bernd
Bernd:
Just a quick note to bump this thread back to the top.

I haven't given up on this project  :lol: ,just in the make a tool to make a tool to do some milling mode. Plus with school taxes coming next month the CFO says that funds are way to low to buy raw stock. :palm: Poor planning on the shop management's part.  :bang:

Bernd
dsquire:

--- Quote from: Bernd on August 16, 2011, 04:30:39 PM ---Just a quick note to bump this thread back to the top.

I haven't given up on this project  :lol: ,just in the make a tool to make a tool to do some milling mode. Plus with school taxes coming next month the CFO says that funds are way to low to buy raw stock. :palm: Poor planning on the shop management's part.  :bang:

Bernd

--- End quote ---

I gotta jump in early here. I don't want you to loose momentum, your doing so good. Now would be a good time to start working on some of the castings.  :poke:

I totally agree on the educational taxes. If you don't pay them then the little devils can't go to school and get suspended and hang out down town. You wouldn't want that on your conscious would you.   :lol: :lol: :lol:
Cheers  :beer:

Don
Bernd:
I did start working on the castings Don. But go here http://madmodder.net/index.php?topic=5877.0 and see why. Hope that'll explain it.  ::)

Bernd
Navigation
Message Index
Next page
Previous page

Go to full version