« previous next »
Pages: [1]   Go Down

Author Topic: wat to do next  (Read 6411 times)

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2188
  • Country: gb
wat to do next
« on: June 15, 2011, 03:53:01 AM »
HI all well im at a bit of a delemer i dont no wat to mack next im limeted at wat i can do with out a mill i fancy making a 4 strok  aney sugestyons
Logged

Offline Bogstandard

  • Bogs Group
  • Hero Member
  • *****
  • Posts: 1107
Re: wat to do next
« Reply #1 on: June 15, 2011, 05:00:11 AM »
Try making a finger engine.

John
Logged
If you don't try it, you will never know if you can do it.

Location - Crewe, Cheshire

Skype - bandit175

Offline Stumpy

  • Jr. Member
  • **
  • Posts: 16
Re: wat to do next
« Reply #2 on: June 15, 2011, 02:51:02 PM »
What about the 15cc nemit no castings the plans come with a jig for doing the cam in the lathe.  A good mate of mine did one on a 7x4 lathe in about 9 weeks ?
Logged
If i cant fix it ill know some one that can

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2188
  • Country: gb
Re: wat to do next
« Reply #3 on: June 16, 2011, 03:04:27 AM »
HI stumpy have you got any pics of that engine  and wher did your frend get the plans from regards bob
Logged

Offline Bogstandard

  • Bogs Group
  • Hero Member
  • *****
  • Posts: 1107
Re: wat to do next
« Reply #4 on: June 16, 2011, 09:14:48 AM »
Bob,

Please read your PM's


John
Logged
If you don't try it, you will never know if you can do it.

Location - Crewe, Cheshire

Skype - bandit175
Pages: [1]   Go Up
« previous next »