| The Craftmans Shop > Backyard Ballistics |
| Making Chamber reamers |
| << < (2/2) |
| Corvus corax:
--- Quote from: Bernd on June 11, 2011, 02:16:23 PM ---Corvus, You did nothing wrong. It's easy to fix. Your wish is my command. Moved to the Ballistics section. Bernd --- End quote --- Thanks Boss or should I say Genie :D Having chambered quite a few barrels over the years so I can vouch for the info. The floating reamer holder is an excellent idea. I have a commercial version, but the one he describes is more than adequate and a lot more cost efficient. I have previously made some chamber reamers but they were the half reamer type, where the profile is cut in half and then sharpened, these work well but I always wanted to make a fluted reamer. For a while now I have had a project idea for a .45-70 and as soon as I find a decent barrel blank I may look at making the reamer like this. |
| Navigation |
| Message Index |
| Previous page |