Gallery, Projects and General > Project Logs

Big Marine Steam Engine

<< < (14/36) > >>

doubleboost:
Hi
Got a big bit done it is nearly a runner
Time for a fly wheel
I had a 8 inch disc with a hole in it about the size i wanted but a bit thin
A centre boss was turned up on my boxford
The big bit was possible for me to machine but it would have taken a long time
Rob Wilson kindly offerd to rough it out for me on his referbished cub lathe
(Robs idea of roughing out is different from mine) needless to say it turned out perfect.
 
Time to cut a key way in the crank

The proportions are just right

Could not resist making it spin around
Click the picture

Just a ecentric strap and some linkage should have it running

John

saw:
Wow  :bugeye:
You have done a greate work her, and soon you have a runner  :clap: :clap: :clap:

sbwhart:
Looking real good John.

 :clap: :clap: :clap:

 :thumbup:

Stew

Stilldrillin:
Well done John!  :clap: :clap:

It's a great step forward when parts can be "oscillated".......  :thumbup:

David D

arnoldb:
Good going John  :thumbup:

Makes the right sound as well  :D

Kind regards, Arnold

Navigation

[0] Message Index

[#] Next page

[*] Previous page