Gallery, Projects and General > Gallery
flip up toolholder for screwcutting
wheeltapper:
Hi
I read all the posts about this gadget and always fancied making one but never did.
the latest issue of Model Engineers Workshop had an article about them so I decided to have a go.
the back
flipped up
I changed the back slightly to a bar that fits straight into my QCTP to cut down on overhang.
And blow me it really works :D :D
It's one thing to watch a video and quite another to watch your own one cutting then sliding back to the start.
bloody brilliant idea!
Roy
DaveH:
Roy,
Looks good :clap: and like you say it works :thumbup: Well made :D
Was it your design or bit of this and that?
Just to give me an idea of the size - What size is the HSS tool bit?
It is a really clever idea.
:beer:
DaveH
wheeltapper:
Its not my design, various types have been around on here for some time, I just slightly modded the version in MEW.
the tool is 8mm sq, length of the moving section is 55mm and the angle base is 50 mm.
Roy
DaveH:
Thanks Roy,
I really fancy one of these - time I had a go.
DaveH
dsquire:
Guys
Rather than reinvent the wheel refer to this thread started by Bogs
http://madmodder.net/index.php?topic=2323.msg24413#msg24413
:) :)
Cheers :beer:
Don
Navigation
[0] Message Index
[#] Next page
Go to full version