| Gallery, Projects and General > Gallery |
| flip up toolholder for screwcutting |
| (1/2) > >> |
| wheeltapper:
Hi I read all the posts about this gadget and always fancied making one but never did. the latest issue of Model Engineers Workshop had an article about them so I decided to have a go. the back flipped up I changed the back slightly to a bar that fits straight into my QCTP to cut down on overhang. And blow me it really works :D :D It's one thing to watch a video and quite another to watch your own one cutting then sliding back to the start. bloody brilliant idea! Roy |
| DaveH:
Roy, Looks good :clap: and like you say it works :thumbup: Well made :D Was it your design or bit of this and that? Just to give me an idea of the size - What size is the HSS tool bit? It is a really clever idea. :beer: DaveH |
| wheeltapper:
Its not my design, various types have been around on here for some time, I just slightly modded the version in MEW. the tool is 8mm sq, length of the moving section is 55mm and the angle base is 50 mm. Roy |
| DaveH:
Thanks Roy, I really fancy one of these - time I had a go. DaveH |
| dsquire:
Guys Rather than reinvent the wheel refer to this thread started by Bogs http://madmodder.net/index.php?topic=2323.msg24413#msg24413 :) :) Cheers :beer: Don |
| Navigation |
| Message Index |
| Next page |