Author Topic: Anyone ever handled or tested Kolsterized 300 series stainless parts  (Read 4103 times)

Offline bry1975

  • Sr. Member
  • ****
  • Posts: 417
  • Country: gb
    • http://www.satintime.co.uk
Any of you chaps had the pleasure of handling or testing Kolsterized 300 series stainless parts?

TIA

Bry

Offline David Jupp

  • Sr. Member
  • ****
  • Posts: 308
  • Country: gb
  • Teesside - UK
Re: Anyone ever handled or tested Kolsterized 300 series stainless parts
« Reply #1 on: June 10, 2011, 03:22:57 AM »
Bry - the company I mentioned to you on another subject uses this treatment widely on their SS items.  Avoids galling problems on the threads etc.

Offline bry1975

  • Sr. Member
  • ****
  • Posts: 417
  • Country: gb
    • http://www.satintime.co.uk
Re: Anyone ever handled or tested Kolsterized 300 series stainless parts
« Reply #2 on: June 12, 2011, 08:18:21 AM »
Thanks David,

I actually sent TWO 304 grade dome nuts out to the hardeners last week will be interesting to see how the kolsterising turns out.