The Breakroom > Resources

For beginners to machining

(1/1)

bogstandard:
This is a nice easy to get about site that gives some good explanations of the basics of things.

http://www.jjjtrain.com/vms/library.html

So if you see someone talking about a certain type of operation, you will be able to understand what it is all about. Plus you might learn a lot as well.

But please be aware that it is geared towards US terminology, so a few of the sayings or words or settings (eg angles on countersinks) might be misread or different if you are from another part of the world.

John

Brass_Machine:
Nice link John!

Eric

Mustang:
Lot of good info there. Now I can quit  :bang:

Andy

Navigation

[0] Message Index