| The Breakroom > Resources |
| For beginners to machining |
| (1/1) |
| bogstandard:
This is a nice easy to get about site that gives some good explanations of the basics of things. http://www.jjjtrain.com/vms/library.html So if you see someone talking about a certain type of operation, you will be able to understand what it is all about. Plus you might learn a lot as well. But please be aware that it is geared towards US terminology, so a few of the sayings or words or settings (eg angles on countersinks) might be misread or different if you are from another part of the world. John |
| Brass_Machine:
Nice link John! Eric |
| Mustang:
Lot of good info there. Now I can quit :bang: Andy |
| Navigation |
| Message Index |