Author Topic: engine No11 (Read 22287 times)

krv3000 · « **on:** May 27, 2011, 06:01:51 PM »

HI all its bin sum time sinse i last posted right on friday i maniged to start and finish the valve chest for my engine No 11 right pisc

krv3000 · « **Reply #1 on:** May 27, 2011, 06:03:06 PM »

more pics

Bluechip · « **Reply #2 on:** May 27, 2011, 06:19:06 PM »

Hi KRV ..

What's 'engine # 11' ??

BTW I've wondered what the significance of KRV3000 was ..

Accidently spotted one on the net ... whacking great milling machine ..

You got one ??

Dave BC

krv3000 · « **Reply #3 on:** May 27, 2011, 06:27:04 PM »

HI well i did post sum pics of a steam engine that im on making sumthing on the linse of a stuart No10 H and as regards to the mill i dont have one i yoused one at my last plase of work i number all my engines her is a pic of engine No 10

krv3000 · « **Reply #4 on:** May 29, 2011, 07:41:38 PM »

HI all ? have looked for my post on engine No 11 can not find it never mind did a bit more today made the valve and valve nut and two pipe fitings sum pics

Bogstandard · « **Reply #5 on:** May 29, 2011, 09:05:02 PM »

Krv,

It's nice to see that you are doing it the long way, by hand.

A lot of us have forgotten that a drill, hacksaw and file can be used instead of a mill. It brings back memories when I had no mill either, but I had a lot of elbow power then.

John

Rob.Wilson · « **Reply #6 on:** May 30, 2011, 04:18:21 AM »

Hi KVR

Dont no how i missed this post

,,,,,,,,, that a real nice engine you have built

Rob

metalmad · « **Reply #7 on:** May 30, 2011, 04:23:43 AM »

not bad with out a mill hay
Pete

krv3000 · « **Reply #8 on:** May 31, 2011, 04:57:36 AM »

Hi more pics

krv3000 · « **Reply #9 on:** May 31, 2011, 04:59:26 AM »

even more

Bogstandard · « **Reply #10 on:** May 31, 2011, 05:05:20 AM »

That is coming along just great K.

Bogs

krv3000 · « **Reply #11 on:** May 31, 2011, 05:05:39 AM »

last ones

AdeV · « **Reply #12 on:** May 31, 2011, 05:07:09 AM »

Nice work Bob! You must have the patience of a saint doing all that with files & hacksaws... although I must admit I get bored of filing very quickly...

krv3000 · « **Reply #13 on:** May 31, 2011, 05:07:15 AM »

thanks bogs my name is bob

krv3000 · « **Reply #14 on:** May 31, 2011, 05:11:41 AM »

thanks Adev any news on that engine you did the hed for

krv3000 · « **Reply #15 on:** May 31, 2011, 05:16:57 AM »

last ones

krv3000 · « **Reply #16 on:** May 31, 2011, 05:19:14 AM »

krv3000 · « **Reply #17 on:** May 31, 2011, 05:22:23 AM »

HI all sos for the way i have posted the pics me internet is runing rather slow thanks all

krv3000 · « **Reply #18 on:** May 31, 2011, 06:29:11 PM »

hi all i hope you all are not geting fed up of me posting so much right i did a bit more today i gave sum partes a good cleen redy for fimel asembaly and made up the cupaling for the valve sum pics

Rob.Wilson · « **Reply #19 on:** May 31, 2011, 06:33:58 PM »

Really nice going Bob

Very impressed ,, just love that flywheel

You could do with a few more photos

Rob

AdeV · « **Reply #20 on:** May 31, 2011, 06:45:15 PM »

That's looking really nice Bob, can't wait to see it assembled.

To answer your earlier question - I've not heard from the engine owner yet, I think it'll be a few weeks yet before he's ready to run it.

krv3000 · « **Reply #21 on:** June 04, 2011, 06:49:00 AM »

HI all engine No11 is gnaw finished sum pics

krv3000 · « **Reply #22 on:** June 04, 2011, 06:50:31 AM »

last ones

metalmad · « **Reply #23 on:** June 04, 2011, 07:04:00 AM »

Hi Bob
I can see the gleam from that Flywheel all the way over here in oz

In your pics, i see what looks like wood in the barrel can u explane a little, i dont know the design

Pete

krv3000 · « **Reply #24 on:** June 04, 2011, 07:57:41 AM »

HI yep no problem the engine is made up by me no desing as sutsh rufley bast on a stuart turner No 10 horesontel engine the wood on the barrel is to asimualate silinder laging all i did for that is turn up a pece of wood then drilld out the midel cut to lenth then cut it to fit a rawnd the cilinder its not one hole pece but two if you look you may see the joine then its glued on to the cilinder with thermobond its a bit like epoxey but desinde for things that gets hot

News:

Author Topic: engine No11 (Read 22287 times)

Rob.Wilson

Rob.Wilson