| Gallery, Projects and General > The Design Shop |
| UK machinist recommendation |
| (1/6) > >> |
| bry1975:
Hi, Any of you chaps into machining Aluminium and Stainless am looking to build a luxury pressure tester. Any one interested in the machining work or recommend someone suitable? Kinda after something like below but much better. :D Thanks in advance. Bry. |
| John Stevenson:
Better than $3,250 ? :med: John S. |
| bry1975:
Well yer! I want my next chamber to be able to test comfortably down to 4,900metres so rated to 550 Bar. Bry |
| Jonny:
Some serious pressure there 8000psi plus the safety factor at least 1 1/2 times. I would be more concerned with the fittings and fixings made or chosen, what threads and materials. What sizes are we looking at? |
| bry1975:
Hi there, Yes serious pressure my last chamber was ok to about 330-340Bar the gasket would blow at that pressure bolts stretching. Yes safety factor is important will want 1.5 minimum and limit the hydraulic pump to 500Bar max. |
| Navigation |
| Message Index |
| Next page |