| The Craftmans Shop > Backyard Ballistics |
| Pirate Cutlass |
| << < (6/11) > >> |
| Rob.Wilson:
--- Quote from: Powder Keg on November 07, 2011, 10:13:09 PM --- If I can get my projects to cooperate. ~Wes~ --- End quote --- :lol: :lol: :lol: :lol: Wes i know how that one goes :Doh: This is a truly madmodder project ,,,,,,,,,,,,,, :med: Rob |
| Stilldrillin:
--- Quote from: Rob.Wilson on November 09, 2011, 04:02:39 PM --- --- Quote from: Powder Keg on November 07, 2011, 10:13:09 PM --- If I can get my projects to cooperate. ~Wes~ --- End quote --- :lol: :lol: :lol: :lol: Wes i know how that one goes :Doh: This is a truly madmodder project ,,,,,,,,,,,,,, :med: Rob --- End quote --- It certainly is! :clap: :clap: Quietly enjoying....... :thumbup: David D |
| Powder Keg:
I'm glad people are enjoying this. Today I managed to get the handle mounted onto my pistol. I also managed to bust off one of the brass screws I was using to mount it with. I had to mill it out bigger and turn a wood dowel to fill the hole and glue it in. I'll try and finish shaping the handle tomorrow. ~Wes~ |
| Powder Keg:
Before starting the shaping I put a piece of electrical tape on the receiver. This was my gauge to stop filing/sanding. It worked out great!!! I filed/sanded the wood down where the hand guard is inletted also. I then shaped and blended everything together. First I filed it close then I sanded it the rest of the way down. I'm using emery cloth glued to a board with great results. After I got it sanded down where I wanted it I mopped on some denatured alcohol. This raised the grain and cleaned out the pores. I then sanded it down again. I did this several times until the little feathers quit coming back. The wood is almost shiny now. Later, ~Wes~ :wave: |
| Rob.Wilson:
Hi Wes Whats sort of finish will you be going for on the steel parts ? Rob Oh ,,,, daft question ,, can you walk down the street with it ? :D |
| Navigation |
| Message Index |
| Next page |
| Previous page |