Gallery, Projects and General > Project Logs
Hit n Miss Engine ,,,,to MR D Kerzel's design
Boz:
As ever, some interesting techniques for me to learn from, as well as a lovely build :bow:
Boz
raynerd:
That is a really nice way of keeping the pressure from bending the crank using that spacer.
Just wondering, I noticed you drilled right through the two bearing supports in position. When I built my Stuart I was encouraged not to do this because they may deflect off centre as the drill went through. I guess because you were boring you could take a very light final cuts and run it in and out so that you knew you wouldn`t get this deflection - is that right?
Chris
Dean W:
"Several hours later"..... : ) That's a funny bit about the saw, Rob.
Things are looking great, and you're showing some solid machining practice. Enjoying your thread here, mate!
Rob.Wilson:
Cheers lads :D :thumbup:
--- Quote from: metalmad on May 05, 2011, 05:54:48 PM ---what are u doing with the gear shaft rob?
are u using custom gear sizes?
Pete
--- End quote ---
Hi Pete ,,,,,,,,,,,,,,,,,,,,,, Nothing as exciting ,, just fixing the shaft a slightly different way :)
--- Quote from: craynerd on May 06, 2011, 08:59:33 AM ---Just wondering, I noticed you drilled right through the two bearing supports in position. When I built my Stuart I was encouraged not to do this because they may deflect off centre as the drill went through. I guess because you were boring you could take a very light final cuts and run it in and out so that you knew you wouldn`t get this deflection - is that right?
Chris
--- End quote ---
Hi Chris ,,,,,,,,,,,,,,, you got it ,i took it easy drilling ,, leaving plenty of material to bore to final size :dremel:
Well i just about finished the crank ,, still needs some de burring , a couple of key ways milled and cut to length :dremel:
Milled off the excess material ,,, to lazy to use a hacksaw ::)
Mounted between centres and ruff turned
Then finish turned to size
Cheers Rob
saw:
Still a master pice Rob. :clap: :clap:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version