| The Shop > Metal Stuff |
| Milling question. |
| << < (3/3) |
| Stilldrillin:
Thasright! ....... In theory! :palm: Drinks can/ cooking foil usually works wonders. Good luck! :thumbup: David D |
| BK:
I did the tramming thingo today, 10 thou out over 10" (on the long thingy ::)) I put 5 thou under one side, then checked the other way, another 2 thou (shim brass) I can live with what I have now, about .0015" out each way. Thanks for the advice. |
| Stilldrillin:
Well done Bernie! :clap: That's my first job, for Monday morning...... :thumbup: David D |
| Bogstandard:
Sorry I didn't get back to you on the length issue, must have missed it. There are in fact more reasons to getting the tramming perfect than people realise, and a query from Bernd about why I was machining a part a certain way was explained by this posting. http://madmodder.net/index.php?topic=2083.msg22206#msg22206 I hope it explains it to you just as well. John |
| BK:
It certainly did Bogs, thanks for the link. :thumbup: |
| Navigation |
| Message Index |
| Previous page |