| Gallery, Projects and General > Project Logs |
| Test Pic |
| (1/4) > >> |
| metalmad:
Hi guys some of you may know me from over on Hmem where ive been posting My "Sows ear" hit and miss kerzel (my second project, my first was a "Webster") well im not too far away from finishing it and am thinking about posting my next one here, as a change of pace :beer: I thought ID post a pic and see if the size and res is ok for Madmodder. I dont know much about computers or cameras either for that matter,but my 18 month old loves the smilys bouncing around :) Pete |
| MikeA:
Hello Pete, I've been watching your build on HMEM - just recently completed my first engine and am well on my way with an Upshur so anything H&M is of interest to me. I don't know if it's just my setup, but your photo was about twice as wide as my wide screen monitor so I'd suggest you might want to reduce the size quite a bit. It appears your image size is ~2,500 X 1960 pixels, and the photos that fit onto the screen are usually 640 X 480. There are a number of ways to resize the photos including some freebies. Let me know what size you settle on for my future use. Best, Mike |
| andyf:
Pete, my computer is a bit of an antique, with only 500Mb of RAM. After several attempts to open your post caused Internet Explorer to hang, I finally got the post open, but the pic isn't visible. I know little about computers, so don't know if it's the size of the pic or something else which is causing the problem, but all the other posts on here have always opened without a hitch. Andy |
| lordedmond:
Yep you need to resize it down a bit Although it is fine here very good quality , but I do have a 27 inch iMac on a 50 mb cable :) Stuart |
| BillTodd:
Serif PhotoPlus V? is available free. It requires registration - they will send you umteen special offers by email, but their software is very good value. I use it myself. http://www.freeserifsoftware.com/ Bill |
| Navigation |
| Message Index |
| Next page |