Gallery, Projects and General > The Design Shop

Longer column for mini mill...?

<< < (3/5) > >>

Rob.Wilson:
Thanks for the info Rich  :thumbup:

I just need something for drilling  weee holes

I have some 30mm chrome hydraulic rod , i can cut you a length off for you if you want a bit .

Rob   

Andy:
Hi Rich. The fitting under the column that you mention looks like it needs a C spanner. Something that you could maybe make up. I hacked a pair of them out of steel bar for use on my lathe. Some people fabricate them. Doesn't need to look pretty. On this particular setup you could also use a bit of flat bar with two projections sticking out. To be used key style.

The fitting looks similar to the locknuts that Seig etc use on the spindles of their 7x lathes.

John Rudd:

--- Quote from: Rob.Wilson on March 28, 2011, 03:02:06 PM ---Thanks for the info Rich  :thumbup:


I have some 30mm chrome hydraulic rod , i can cut you a length off for you if you want a bit .

Rob   

--- End quote ---

There ya go sorted.....

HS93:
I have one off them rob had it about two years, I do a lot of small brass drilling (modelmaking) etc and it is far better than the drill I Had befor I get a lot longer life out of small drills.for the price I paid ( arc is by far the cheapest for speck) it is great value, plus it has enough weight not to roam about without being fixed.

peter

saw:
I like you models very beautifull  :thumbup: :thumbup:

Navigation

[0] Message Index

[#] Next page

[*] Previous page