The Shop > Metal Stuff

Mill Engine

(1/3) > >>

doubleboost:
Hi
I seem to have gotten bogged down with my v twin marine engine  :( :( :(
 So i have started another project.

Going to build a big mill engine :D :D :D :D
I made a start on a pattern for the cylinder
I want it to have a 4 inch stroke and a bore of at least 2 1/2 inch no bolts smaller than 5 mill  :) :) :) :)
It will be double acting with a slide valve , nice and big and simple  :) :) :)
Once i have my cylinder i will be able plan things out
Glued some magic wood together last nite


Started to square up the ends for the driving dog

Poor boxford is contaminated again  :( :( :( :(

saw:
What happend with your'e v twin marine engine ?  :smart:   

doubleboost:
It is about 80 % done just seem to have lost interest  :( :( :(
It will come back and i will finish it :D :D :D :D
Just needed a change from fixing machines and making tooling  :doh: :doh: :doh:

saw:
Ok I missundersud you, I thought som shocking hade happend (dropped on the floor ore something
). I can understand that you need something else to do.  :thumbup:

Bernd:
Neat idea of using the spindle for a clamp.  :clap:

Bernd

Navigation

[0] Message Index

[#] Next page