| The Shop > Metal Stuff |
| Mill Engine |
| (1/3) > >> |
| doubleboost:
Hi I seem to have gotten bogged down with my v twin marine engine :( :( :( So i have started another project. Going to build a big mill engine :D :D :D :D I made a start on a pattern for the cylinder I want it to have a 4 inch stroke and a bore of at least 2 1/2 inch no bolts smaller than 5 mill :) :) :) :) It will be double acting with a slide valve , nice and big and simple :) :) :) Once i have my cylinder i will be able plan things out Glued some magic wood together last nite Started to square up the ends for the driving dog Poor boxford is contaminated again :( :( :( :( |
| saw:
What happend with your'e v twin marine engine ? :smart: |
| doubleboost:
It is about 80 % done just seem to have lost interest :( :( :( It will come back and i will finish it :D :D :D :D Just needed a change from fixing machines and making tooling :doh: :doh: :doh: |
| saw:
Ok I missundersud you, I thought som shocking hade happend (dropped on the floor ore something ). I can understand that you need something else to do. :thumbup: |
| Bernd:
Neat idea of using the spindle for a clamp. :clap: Bernd |
| Navigation |
| Message Index |
| Next page |