Home Base > Introductions

Yet another Swede...

(1/2) > >>

Kjelle:
Hi all! Been lurking here for a while, reading and learning quite a lot of stuff, while looking for a lathe and possibly a small mill

I'd like to be able to make small parts for my bike resto project, and maybe some small engines later on...I work as a security officer, and at one place I do my rounds there is a large prototype machine shop, that gives me serious tool envy! In another part of that building, there is a Deckel FP1 mill, and a Gaziano SAG12 lathe standing idle... Too big for my small shop (10'x10'/3x3m), but...
I've been reading at other forums, and I choose MadModder due to the rather friendly atmosphere and characters here.  :mmr:

Kjelle (owner of 1,5 Ancillotti MX/Enduro bikes)

saw:
Hi and welcome from another Swede  :lol:

j45on:
Welcome Kjelle  :beer:

John Hill:
Hi Kjelle! :beer:

I think you will find others on this site with 10'x10' shops, and they produce nice stuff in their's.

Brgds

John
in New Zealand, where I own a Benelli Motorella,  Honda Z50J and a Douglas 80 Plus.  Yes they all run but only the Motorella is legal for the road right now.

Brass_Machine:
Hiya Kjelle  :wave:

Welcome to the collective  :borg:

Tell us more about the bike resto project!


Eric

Navigation

[0] Message Index

[#] Next page