| Home Base > Introductions |
| Yet another Swede... |
| (1/2) > >> |
| Kjelle:
Hi all! Been lurking here for a while, reading and learning quite a lot of stuff, while looking for a lathe and possibly a small mill I'd like to be able to make small parts for my bike resto project, and maybe some small engines later on...I work as a security officer, and at one place I do my rounds there is a large prototype machine shop, that gives me serious tool envy! In another part of that building, there is a Deckel FP1 mill, and a Gaziano SAG12 lathe standing idle... Too big for my small shop (10'x10'/3x3m), but... I've been reading at other forums, and I choose MadModder due to the rather friendly atmosphere and characters here. :mmr: Kjelle (owner of 1,5 Ancillotti MX/Enduro bikes) |
| saw:
Hi and welcome from another Swede :lol: |
| j45on:
Welcome Kjelle :beer: |
| John Hill:
Hi Kjelle! :beer: I think you will find others on this site with 10'x10' shops, and they produce nice stuff in their's. Brgds John in New Zealand, where I own a Benelli Motorella, Honda Z50J and a Douglas 80 Plus. Yes they all run but only the Motorella is legal for the road right now. |
| Brass_Machine:
Hiya Kjelle :wave: Welcome to the collective :borg: Tell us more about the bike resto project! Eric |
| Navigation |
| Message Index |
| Next page |