| The Craftmans Shop > Backyard Ballistics |
| $30 Project shotgun |
| << < (8/8) |
| 75Plus:
Puleeeeze find a slotted screw for the fore end. Preferably an oval headed one. The gun is several decades older than Phillips screws and the majority of current firearms still use slotted. :doh: :doh: Other than the screw the project looks Great. :clap: :clap: :clap: Joe |
| Powder Keg:
This gun was made in 2000. I found one just like it in a pawn shop last weekend and it had the same screw. If I were keeping it I'd be making a new one. I decided to use Tung oil to finish the stock. I read good and bad about every product out there it seems like. There were a couple of gun stock sellers that recommended tung oil to finish their stocks with. So that's what I decided on. I'll snap a picture a little later. Thanks for the compliments, Wes :wave: |
| Powder Keg:
Just a couple pictures. Later, Wes :wave |
| crabsign69:
thats a nice piece there a little work with steel wool and call it good. |
| Powder Keg:
The last coat of sealer was just applied. I removed the rust from the receiver and the barrel tonight. I'll re-blue the barrel and put it back together for the last time in a day or so\o/ Then on to the next one\o/ And I'll post some pictures. It sure is shiny :) Wes |
| Navigation |
| Message Index |
| Previous page |