| The Shop > Tools |
| 3MT collets |
| << < (2/3) > >> |
| Darren:
These ER collet sets are a expensive, but not for what you get I suppose. Then I found this, now that's not too bad if you just buy a few collets that you need. http://cgi.ebay.co.uk/ER32-MT3-M12-COLLET-CHUCK-CNC-MILLING-LATHE-NEW-A75_W0QQitemZ110307873889QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item110307873889&_trksid=p3286.c0.m14&_trkparms=66%3A3%7C65%3A15%7C39%3A1%7C240%3A1318 Darren |
| Darren:
And, Same seller, will combine shipping as well. http://cgi.ebay.co.uk/ER32-COLLET-SET-10-PCS-CNC-MILLING-LATHE-NEW-A06_W0QQitemZ110307872407QQcmdZViewItemQQptZLH_DefaultDomain_3?hash=item110307872407&_trksid=p3286.c0.m14&_trkparms=66%3A3|65%3A15|39%3A1|240%3A1318 Now that's not too bad, certainly cheaper than all the 5c collets I had to purchase Darren |
| CrewCab:
Darren, I've had a couple of bits from that same seller, (a 3MT-ER25 Collet Chuck and a small milling vice), goods were fine and service was pretty quick, I'd have no hesitation using them again. hth Dave |
| Darren:
Thanks Dave thats good to know, how did you get on with using them. Do you like them. Like Ralph said, if you could get rid of a normal chuck these should be better even for drilling. There is nothing like a chuck for mangling drill bit shafts when they slip !! Darren |
| bogstandard:
Darren, Fitting ER32 collets will be a major step up for you, but go the extra yard and get the full 18 piece set of collets. It is a PITA when you come to use a cutter or drill and you haven't got a collet to fit it. Remember, customs are clamping down now, and will charge import duty on anything over £18, then the P.O. charges you £8 for sending you the postcard to tell you to go collect it from the sorting office and pay the due taxes. I tried a couple of months ago to get some bits in for my mo'sickle from the States thru the back door, by directing it thru Frankfurt in Germany, but I still got stung. John |
| Navigation |
| Message Index |
| Next page |
| Previous page |