Gallery, Projects and General > Project Logs

Little Kathy and me

<< < (2/11) > >>

Brass_Machine:
Don't worry about your broken English. It is much better than my non existent Swedish!  :bugeye:

Looking very good! Keep the pictures coming.

Eric

75Plus:
Hi Benni,

If  you don't already have one here is a conversion chart for drill sizes in metric, inch and number/letter from .25mm to 1 inch.

http://academic.evergreen.edu/projects/biophysics/technotes/fabric/drill_conv.htm

And here is a simple, quick and free program for imperial to metric (or visa-versa) conversions.

http://joshmadison.com/convert-for-windows/

Dean W:
You're doing well, Benni.  This will be an enjoyable build, (for all of us!).
 :thumbup:

sbwhart:
Good job that man  :thumbup: :thumbup: :thumbup:

Enjoying your build Benni keep it comming.

 :wave:

Stew

saw:
Hi every one and thanks for nice words.  :wave:

Da_Kengineer_Meister:
A drillchuck is not the best tool for a endmill, so I take very very light cut. (I'll use the drillchuck while I'll waiting for some new eqiptment[mandrel I think the name is])

75Plus :
Thanks for the links, but as I wrote, I have build a program where I can convert all the inch, fanny numbers and so on to metrics.

Ha det  :thumbup:
Benni

Navigation

[0] Message Index

[#] Next page

[*] Previous page