| Gallery, Projects and General > Project Logs |
| Little Kathy and me |
| << < (2/11) > >> |
| Brass_Machine:
Don't worry about your broken English. It is much better than my non existent Swedish! :bugeye: Looking very good! Keep the pictures coming. Eric |
| 75Plus:
Hi Benni, If you don't already have one here is a conversion chart for drill sizes in metric, inch and number/letter from .25mm to 1 inch. http://academic.evergreen.edu/projects/biophysics/technotes/fabric/drill_conv.htm And here is a simple, quick and free program for imperial to metric (or visa-versa) conversions. http://joshmadison.com/convert-for-windows/ |
| Dean W:
You're doing well, Benni. This will be an enjoyable build, (for all of us!). :thumbup: |
| sbwhart:
Good job that man :thumbup: :thumbup: :thumbup: Enjoying your build Benni keep it comming. :wave: Stew |
| saw:
Hi every one and thanks for nice words. :wave: Da_Kengineer_Meister: A drillchuck is not the best tool for a endmill, so I take very very light cut. (I'll use the drillchuck while I'll waiting for some new eqiptment[mandrel I think the name is]) 75Plus : Thanks for the links, but as I wrote, I have build a program where I can convert all the inch, fanny numbers and so on to metrics. Ha det :thumbup: Benni |
| Navigation |
| Message Index |
| Next page |
| Previous page |