| Gallery, Projects and General > Project Logs |
| Little Kathy and me |
| << < (6/11) > >> |
| saw:
NickG: I'll use a die. :dremel: |
| saw:
Hello gentlemen. Well it’s time for an update. :headbang: First a run on the lathe for making the piston. And complete with the piston road. Then milling the column and making place for the crosshead. Making the column square. Cleaning up the crosshead… and making it square… And check if it fits well. Drilling the guide strip… And checking with the cross head again. Drilling the cross head for the piston road. Drilling and treading for mounting the bottom cover. And it began to be an engine, right? Now I have to do some adjustment so everything will be working in line, I suppose it will take some time, until then.. I’ll be back. :wave: Benni. |
| arnoldb:
Very nice progress Benni - looks great :thumbup: Kind regards, Arnold |
| Dean W:
The assembly shot shows it off well, Benni. It's coming out a nice looking engine. |
| fixit:
Looking very good Benni ! can you please tell me what camera you are using , i have to relace mine and your pic's look realy good. Steve |
| Navigation |
| Message Index |
| Next page |
| Previous page |