MadModder
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Welcome to MadModder!
Home
Help
Search
Login
Register
MadModder
»
The Shop
»
Finishing
»
Nickle plating
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Nickle plating (Read 13557 times)
Powder Keg
Global Moderator
Hero Member
Posts: 932
Country:
Machinist Extraordinaire
Nickle plating
«
on:
July 29, 2008, 11:33:47 PM »
Have any of you done it? I'm thinking of one of Caswells kits. They look fairly straight forward. I'll be posting my results here:o)
Wes
Logged
Wesley P
A Gismo ??? If it has a flywheel or spins and is made with small parts. I'll take one! If it makes noise, moves, or requires frequent oiling and dusting it's a better deal yet. It's especially right if its shiny and bright; but if it's dirty and dull it wont mater at all...
PTsideshow
Global Moderator
Hero Member
Posts: 2570
Country:
Re: Nickle plating
«
Reply #1 on:
July 31, 2008, 06:39:12 AM »
It has been awhile, but I will say this its all in the prep as to cleanliness. Also if you have a jewelry supply house in your area check them out as most carry a line of plating supplies.
http://grobetusa.com/
see if they have a franchise's close to you. or one of them on the web.
https://www.micromark.com/
also has small scale kits.
;D
Logged
"The internet just a figment, of my imagination!'
There are only 3 things I can't do!"
Raise the Dead!
Walk on water!
Fix a broken heart!
and I'm working on the first two!
glen
Bernd
Madmodder Committee
Hero Member
Posts: 3688
Country:
1915 C Cab
Re: Nickle plating
«
Reply #2 on:
July 31, 2008, 09:24:13 PM »
I've got one of Caswells powder coating kits. I think anything they sell is quality stuff. I've seen some people that have used there anodizing kits with great results and they're located close to me.
Bernd
Logged
Route of the Black Diamonds
DeereGuy
Full Member
Posts: 203
Re: Nickle plating
«
Reply #3 on:
January 25, 2011, 12:48:35 PM »
I suspect I will be trying some of the plating soon myself.
Logged
Bob
http://www.d1adaptersolutions.com/
Skype boba1618
My shop:
http://s2.photobucket.com/albums/y39/Deere_X475guy/New%20Shop%20Maching%20and%20Welding/
rleete
Madmodder Committee
Hero Member
Posts: 534
Country:
Re: Nickle plating
«
Reply #4 on:
January 25, 2011, 02:09:32 PM »
Nickel plating involves some nasty stuff. We do it here where I work. Anodizing, yeah, you take precautions with the acids, etc. But this is a whole 'nuther level of health issues. I would not recommend it for home/hobby use.
Logged
Creating scrap, one part at a time
Bogstandard
Bogs Group
Hero Member
Posts: 1107
Re: Nickle plating
«
Reply #5 on:
January 25, 2011, 04:47:04 PM »
I used to work at a place that did electroless nickel plating as part of the production process.
Basically, it is a matter of just keeping the chemicals warm and it deposits nickel onto the surface of the metal put into it. You could in fact do it on a stove.
Go to any plating business and they should be able to coat your parts in very little time and very cheaply. They should give you the choice of matt or bright finish.
Make sure the surface finish is perfect, as marks will show thru.
Bogs
Logged
If you don't try it, you will never know if you can do it.
Location - Crewe, Cheshire
Skype - bandit175
Print
Pages: [
1
]
Go Up
« previous
next »
MadModder
»
The Shop
»
Finishing
»
Nickle plating