Good evening gentlemen.
I thought that I should show you my progress for making my steaming equipment. I alredy have shown you my steam engine, but here it is.

It's a nice little v-2 running pretty well.
Then I started to work on the hand-operated feedpump..

Now I was trying to figger out how to use this in a real steam-world, so I dessided that on the low side, I should choose to take water either from the watertank ore from the condensor (not built yet).
Then on the compression face, I like to choose, if the water should go to the boiler ore to the condensor.

So it means I have to make som globe valves

The feedwaterpump,globe valves and tees are casting brought from PM Resarch Inc

To complete it will take a long time but I will take one step at the time.
Thanks for reading my broken english .
