Gallery, Projects and General > Project Logs
Webster IC Engine build log.
DeereGuy:
Chris,
Why don't you try using a slitting saw first then follow up with your cutter?
Bogstandard:
That looks like your blank is loose
Bogs
madjackghengis:
Hi Chris, I would echo both deere_x475guy and Bogs, and I think I'd put a caliper on the tip of the cutter and see if its the width that matches the tip of the gear teeth. :poke: mad jack
dbvandy:
can I ask why you decided to make the gears from steel? I have just completed my webster build and I made my gears from aluminum modeled after the 20 tooth and 40 tooth gears on my 7x12. A dremel grinder and 30 minutes each and they were done and work beautifully....
Doug
dbvandy:
here is a quick video of the valve train...
and another of the motor running... hope this helps with some ideas....
Doug
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version