The Breakroom > Resources

A couple of old Vids that might be of use

<< < (2/5) > >>

dsquire:
John

Have downloaded Single point tool use and the other is downloading as I type this. Watched the first one and it is very informative as to why a tool will not cut properly if not set right. It should be on everyones list of things to watch when they first start using a lathe and again every time they have trouble cutting. Thanks for making them available John.  :D :D

Cheers  :beer:

Don

cidrontmg:
Downloaded the first, now waiting for the second one. No hiccups, 8 minutes to d/l 134.7 Mb. Very reasonable.
Thanks Bogs, much appreciated!

Bogstandard:
Many thanks for the replies guys, I never know if I am doing things correctly by using these storage sites.

As long as you can get them, that is now fine with me.

If anyone is interested, I do have four more from the same series.


Turning two diameters, shows the use of both right and left hand turning tools.

How to run a lathe, based around an old South Bend, but anyone with an old type of lathe like this would benefit from it, especially a beginner to machining.

Turning a large acme thread.

Cutting a taper using both the compound and a taper turning attachment. Get to know how to use correctly, that bit gathering dust at the back of your machine.

All vids are around 14 mins long and contain very good rock solid techniques that could easily be used on modern lathes.


Bogs

cidrontmg:

--- Quote from: bogstandard on January 06, 2011, 11:23:58 PM ---
If anyone is interested, I do have four more from the same series.


--- End quote ---

Yes, please! I definitively am interested.   :clap:
 :wave:

Bogstandard:
Here are the rest of what I have.

File name: Acme Threading.avi File size: 166.24 MB


File name: How to Run a Lathe.avi File size: 209.63 MB


File name: Taper Turning.avi File size: 114.65 MB


File name: Two Diameters.avi File size: 148.47 MB


Just enjoy them for what they are, and I hope you learn a little as you watch them.



Bogs

Navigation

[0] Message Index

[#] Next page

[*] Previous page