Author Topic: Good HONEST metal supplier (UK)  (Read 12077 times)

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Good HONEST metal supplier (UK)
« on: December 17, 2010, 03:40:40 PM »
Well after an interesting little episode and the spotting of an undesirable shamelessly promoting his hugely overpriced goods, I asked the chief and he said it's alright to share this with you guys. 


P.L.Hill sales. Metals supplier.

I found him a few years ago and being me had searched a good few sites before I purchased anything.
I've found his price to be more than reasonable IMO and in the few phone conversations and the 1 meeting (he had a small stall at a show 2 years ago) I found the man himself to be a really nice guy.



I've purchased a fair bit from him over the years and never had any issues with the goods and delivery. His service is spot on  :thumbup:
Make sure you leave your phone number, I've had a couple of issues with my card and address that he sorted out swiftly so I got my stock  :ddb:

Anywho, here's the link.... Compare him to your supplier and post any interesting differences

http://www.plhillsales.com/index.asp   



Let's see if we can get any other good deals on here. Member quality assured ones that is.... Spammers can sod off :wack: 



As always, I'm not part of his company or nuffink  :)



Ralph.
I know what I know and need to know more!!!

Offline Bogstandard

  • Bogs Group
  • Hero Member
  • *****
  • Posts: 1107
Re: Good HONEST metal supplier (UK)
« Reply #1 on: December 17, 2010, 06:14:41 PM »
Ralph,

If you are refering to Noggin, he is in fact a very reasonably priced metal supplier, Noggin End, just down the A500, a few miles from myself.

I think he has made a mistake in how he introduced himself, and might have shot himself in the foot.


John
If you don't try it, you will never know if you can do it.

Location - Crewe, Cheshire

Skype - bandit175

Offline andyf

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1795
  • Country: gb
    • The Warco WM180 Lathe - Modifications
Re: Good HONEST metal supplier (UK)
« Reply #2 on: December 17, 2010, 07:00:18 PM »
I think Ralph's supplier is in Bradford, John. His price list is somewhat cheaper than most I have looked at, but mild steel is only listed CRS with flats in smallish sizes, though he does say other sizes are available on request. Good to see rounds of silver steel up to 2"; pricey at that size, but that's not surprising. I might make up an order early in 2011 and give him a try. The contents of the junkbox are getting a bit small now, and keep getting smaller and smaller each time I try making something out of them and then throw the results back in disgust.

Andy

 
Sale, Cheshire
I've cut the end off it twice, but it's still too short

Offline Divided he ad

  • WARNING: LIKES SHINEY THINGS
  • The Collective
  • Hero Member
  • *****
  • Posts: 1950
  • Country: gb
  • Between Chester, Wrexham, ruthin & Holywell :-)
Re: Good HONEST metal supplier (UK)
« Reply #3 on: December 17, 2010, 07:59:06 PM »
Wasn't stating names John, but since you called it....

A quick comparison of charges  £2.70 for 300mm of 9 1/6 round brass bar as opposed to £6 for 12"... And 3" round @ £5.80 per25mm as opposed to £14 per inch.

If you were just going to purchase 5 units of the 9 1/6 round bar above £21 as opposed to £39 That's inclusive of postage. That's a huge difference to me.

Don't want an issue of it (hence no names used in OP)  I was just proper shocked at the difference  :bugeye:   


Still can't find anything close to your supply though! Scrappy is a bit hit and miss, but great on cost  :thumbup:




Not forcing anyone to buy, just stating my knowledge of a cheap (IMHO) source.





Ralph.
I know what I know and need to know more!!!

Offline picclock

  • Hero Member
  • *****
  • Posts: 613
  • Country: gb
Re: Good HONEST metal supplier (UK)
« Reply #4 on: December 18, 2010, 03:13:28 AM »
Just noticed the prices do not include VAT - he may not be VAT registered.

From T & C :-

"All prices are exclusive of VAT, current rate 0%, subject to changes in taxation."

If so make the most of it .. .

picclock
Engaged in the art of turning large pieces of useful material into ever smaller pieces of (s)crap. (Ferndown, Dorset)

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: Good HONEST metal supplier (UK)
« Reply #5 on: September 10, 2011, 04:06:25 AM »
As a small (belated) footnote, I sent Hills an initial £10 order.

They sent me the correct brass bar, but the 3/16" m/s rod arrived as 4mm dia!  ::)

Email requests for correction were ignored..........  :bang: :bang:

I returned to Noggin for my further supplies.  :thumbup:

David D
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline modeng200023

  • Full Member
  • ***
  • Posts: 132
  • Country: gb
Re: Good HONEST metal supplier (UK)
« Reply #6 on: September 10, 2011, 10:59:26 AM »
I've used P L Hill with no problems but for my latest metal order I went to M-Machine Metals.
Excellent service and reasonable prices.

John

Offline Arnak

  • Jr. Member
  • **
  • Posts: 30
Re: Good HONEST metal supplier (UK)
« Reply #7 on: September 10, 2011, 11:48:58 AM »
Hi,

I can second that good response from M-Machine Metals.

I have no connection to the company just a happy customer. ::)

Martin

Offline Marauder

  • Jr. Member
  • **
  • Posts: 40
Re: Good HONEST metal supplier (UK)
« Reply #8 on: September 11, 2011, 05:46:01 AM »
I have often wondered when going by a scrap yard if its worth going in to see if they have any good alloy or steel bar or flat..does any body else look in scrap yards,Or is old metal not very good to work with ??

Offline Anzaniste

  • Full Member
  • ***
  • Posts: 207
  • Country: gb
Re: Good HONEST metal supplier (UK)
« Reply #9 on: September 11, 2011, 06:21:40 PM »
Just done a quick check with my most frequently used supplier and Mr Hills prices are more than 50% less. Must give him a go next time. :thumbup:
Scrooby, 1 mile south of Gods own County.