Gallery, Projects and General > The Design Shop
Reverse Crank/Over Crank Engine
sbwhart:
Some time ago I spotted an interesting engine at Quarry Bank Mill Style, I didn't recognise the type but after asking around I found out it was an Reverse Crank or Over Crank engine, this particular was quite small no bigger than a suite case, mounted vertically from a beam and was being used to power a small workshop. Here's a few pics of the particular engine.
The cold weather we've bin having in the UK has driven me out of the shop, so I've bin keeping myself warm in doors on domestic duties and to keep me sane I've started drawing up the engine 1/3 scale as a project to start as soon as things warm up.
I've attached some of the drawing as PDF files to give you an idea of the design, my plan is to make the engine from bar stock with the exception of the fly wheel which will be cast iron you can get these quite easily from trade, for the cylinder I'm going to fabricate this up from brass.
If things work out OK I'm planning to fit a governor to the engine, and mount it vertically on a board (painted to look like brick) with some line shafting on the back that the engine will drive, but we'll see how things work out first.
Any comment you guys have will be much appreciated.
Stew
Rob.Wilson:
Hi Stew
Looks a great project :thumbup: ,,, sure is a very interesting design ,,,,, the cross head setup is very unusual :med:
When are going to start making swarf :whip: :whip: :)
Rob
sbwhart:
--- Quote from: Rob.Wilson on December 08, 2010, 09:01:35 AM ---Hi Stew
Looks a great project :thumbup: ,,, sure is a very interesting design ,,,,, the cross head setup is very unusual :med:
When are going to start making swarf :whip: :whip: :)
Rob
--- End quote ---
When the therms go above zero :D
Stew
Rob.Wilson:
--- Quote from: sbwhart on December 08, 2010, 09:37:31 AM ---
--- Quote from: Rob.Wilson on December 08, 2010, 09:01:35 AM ---Hi Stew
Looks a great project :thumbup: ,,, sure is a very interesting design ,,,,, the cross head setup is very unusual :med:
When are going to start making swarf :whip: :whip: :)
Rob
--- End quote ---
When the therms go above zero :D
Stew
--- End quote ---
Southern softy :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Rob :)
sbwhart:
--- Quote from: Rob.Wilson on December 08, 2010, 11:26:57 AM ---
--- Quote from: sbwhart on December 08, 2010, 09:37:31 AM ---
--- Quote from: Rob.Wilson on December 08, 2010, 09:01:35 AM ---Hi Stew
Looks a great project :thumbup: ,,, sure is a very interesting design ,,,,, the cross head setup is very unusual :med:
When are going to start making swarf :whip: :whip: :)
Rob
--- End quote ---
When the therms go above zero :D
Stew
--- End quote ---
Southern softy :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Rob :)
--- End quote ---
Sorry Rob I've No Geordy Blood in me.
:lol:
Stew
Navigation
[0] Message Index
[#] Next page
Go to full version