| Gallery, Projects and General > Project Logs |
| Cylinder Puzzle - Finished Weekend Project! |
| << < (5/17) > >> |
| AdeV:
They're computer drawings! You can tell because, in the 1st pic with the super-shiny items, there's no sign of the camera... I must admit, though, they are extremely good renders. I am most impressed. |
| slowcoach:
Yep, all generated by computer. I just wish there was a key I could press, to convert them from the virtual world in to the real world :lol: Cheers Rob :thumbup: |
| boatmadman:
This is brilliant and I want to make one, but, how do you drill a semi circular hole?? :doh: |
| Majorstrain:
--- Quote from: boatmadman on November 16, 2010, 05:42:44 PM ---This is brilliant and I want to make one, but, how do you drill a semi circular hole?? :doh: --- End quote --- I transfered the piece to the mill and held it with a V block in the vice. Then I used a slot drill to do the holes. I drilled the cap hole before parting it off so there was something substantial to grip in the V block. Pics, when I get home later tonight. Cheers, Phil |
| raynerd:
Yep - the same. Used my new V-blocks :D and just held it in the vice on my mill. I only had an end mill so I went into it at full depth (5mm) very slowly until I took out the semi-circle for the hole. AdeV - AMAZING !!! Haha, my wife has just taken a look at the red one with my name engraved and even she was blown away! Chris |
| Navigation |
| Message Index |
| Next page |
| Previous page |