| Gallery, Projects and General > The Design Shop |
| Coax indicator design |
| << < (7/17) > >> |
| BillTodd:
Well that seems to work OK :) Made a little screw to clamp the probe onto the rocker (worked at second attempt having bent the first one :hammer:) Made a simple hook using a 3mm rod and a magnet from a small loudspeaker to hold the indicator still. Then, gave it its first test... http://www.youtube.com/watch?v=wQYw0c3RN_0 There's a residual ~1/2 thou" wobble caused, I think, by the face out of alignment with the bore. The facing had to be a second operation because of the dual diameters of the bore - I may have another go at it, taking more care this time (MkII will have a straight bore) . I also noted a tiny 'kick' with the thing zeroed on the mill, the cause of which I have not been able to find - could be a piece of **** in the taper part or ??? Bill |
| andyf:
That's terrific! :clap: :clap: :clap: :clap: :clap: Andy |
| bp:
Excellent!! cheers Bill Pudney Adelaide, Australia |
| j45on:
Very nice job :bow: |
| Rob.Wilson:
JUST THE JOB , nice one :bow: :bow: :bow: :bow: Rob |
| Navigation |
| Message Index |
| Next page |
| Previous page |