| Gallery, Projects and General > Project Logs |
| Building a Modern Pneumatic Airgun |
| << < (4/15) > >> |
| Stot:
Did the outlet valve housings today. The outlet valves are poppet valves. A sprung hammer strikes them to open the valve and let some air out, simple stuff really. They are pretty much the same as the inlet valves other than the hole goes straight through which will hold the valve pin of the poppet valve, and the end is threaded to go into the hammer housing that will be made later. There are still holes to be cross drilled on these but their position is dependant on the breech and trigger blocks so ill drill them when those parts are done. As this is the pretty much the same operations as Ive already done, Just some finished item shots. ;) Cheers Stot |
| Powder Keg:
Very professional looking parts there. I'm watching this one closely(o: |
| j45on:
Me to :bow: I was not aware you could build your own air gun until I saw this thread as I said before interesting stuff |
| Stot:
Its bloody adictive too! Im having to limit myself to 2-3 hours a day. I've got about 10 hours in it so far and its mostly been by the book. Ill do the valve internals tomorrow but I have to take a look at the hammer tube and bolt arangement now because I'm not overly keen on having a seperate bolt and hammer handles. Cheers Stot |
| johnbaz:
Fantastic work Stot- those threads are just soooooo smooooth :clap: It's addictive reading too!!! :thumbup: Cheers, John :beer: |
| Navigation |
| Message Index |
| Next page |
| Previous page |