| Gallery, Projects and General > How do I?? |
| Vice Advice |
| << < (2/2) |
| jim:
i've got a K4 vertex one, quite a good bit of kit! |
| Bogstandard:
Actually, if your are going to be making rings as you have shown, it will be a real PITA doing it all on a RT. Most of the work should first be done on the lathe, and only finish off certain areas on the RT. John |
| Rikk:
It did occur to me after that most of that work is much easier on the lathe, and the markings on the K4 should be more than good enough for the bolt hole pattern. I just ordered the K4 for now and see how I get on with that. |
| Navigation |
| Message Index |
| Previous page |