Gallery, Projects and General > Project Logs
Another 4" CNC rotary table
madjackghengis:
Hi Jason, that is one professional tutorial :headbang: I think even I can follow it and not end up using felt tip markers for the buttons when I get to that point. If I can follow it anyone can. Thanks for the very carefully laid out tuturial, I will use it when I get past the making of the board, and get the parts I still need. Great Job. mad jack
j45on:
I will do keypad insert tutorial as well hopefully some time this weekend
I had my keypad printed by a friend with a colour laser printer it looked great
But came out under size :scratch: I need to get to the bottom of this printing problem
John Rudd:
Wow......I bet that took some tme to learn....... :bow:
My biggest problem is learning something completely new...
I'm very impatient but your tut should help me to make a more 'pro' looking panel for future electronic projects
Ta very much.. :clap:
raynerd:
.... I just did mine in word :lol: :jaw: I`m guessing there must have been a better approach
j45on:
Your's looks great Craynerd nice and even that's what I'm trying to achieve :bow:
I'm only using inkscape because I have used it a little before to make some vinyl stickers so I knew if I wanted a 5x5 inch square for example thats exactly what would cut
But I'm having trouble printing :scratch: to the right size
Here is whats happening
The top greyscale one is perfect from an old B&W laser printer
the lowest one is colour laser printed and to short and a little to short in hight as well
the centre two are massively to big and from a inkjet printer
all printed from the same file :bang:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version